MINI ISOLATOR STAND (72" TALL VERSION)
Voltra Ready (No Load Trolley + Pulleys)
$749.00
Skip to product information
MINI ISOLATOR STAND (72" TALL VERSION)
$749.00
Insured Shipping
One Year Structural Warranty
30 Day Money Back Guarantee
MINI ISOLATOR STAND 72" TALL VERSION PACKAGES
72-inch Mini Isolator Stand
A Dedicated Home for Your Isolator
Give your existing compatible Bulletproof Isolator a dedicated home. This is the stand-only product; the Isolator and Isolator-side accessories are sold separately.
The 72-inch upright accommodates the additional trolley travel of the double-ratio system while retaining a 28-inch-wide × 43-inch-long base. Built-in wheels make repositioning easier, and the open-side design allows access for your compatible adjustable bench.
Choose Your Resistance Setup
VOLTRA Ready
For use with your own Beyond Power VOLTRA. Includes the stand and stand-specific hardware, without the Load Trolley, stand pulleys, stand cable, or weight horn. VOLTRA is not included.
Load Trolley + Pulleys
Includes the stand-side pulley system, cable, plate-loaded Load Trolley, and standard 12-inch weight horn. This configuration uses the 1:2 double-resistance ratio.
Double Resistance with the Trolley Configuration
The 1:2 pulley system provides approximately twice the cable-driven resistance of the original 1:1 system for the same loaded plates. That means roughly half the plate weight for equivalent resistance in the same exercise setup.
The double-resistance claim applies to Load Trolley + Pulleys. The VOLTRA Ready option does not include that pulley system or a VOLTRA.
The 72-inch model does not include or need the slide-out base extender feet or screw-in weight-horn extender used on the shorter model for additional plate loading.
Already own an Isolator? Confirm that you also have the correct Cam, Bottom Guide Pulley Bracket, and the attachments needed for your exercises. Use a Kickstand with the Seat/Pad and intended bench-based setup. These Isolator-side parts are not included with the stand.
Heavier Training. Fewer Plates.
The 1:2 double-ratio pulley system provides approximately twice the cable-driven resistance of the original 1:1 Mini Isolator Stand with the same plates loaded. For equivalent exercise setups, you can reach the same resistance with roughly half the plate weight.
| Plates loaded | Original 1:1: approximate leg-extension resistance | New 1:2: approximate leg-extension resistance |
|---|---|---|
| 50 lb | 25 lb | 50 lb |
| 100 lb | 50 lb | 100 lb |
| 200 lb | 100 lb | 200 lb |
These are simplified estimates for representative leg-extension setups, based on the loaded plates only. They exclude the weight of the trolley, lever arm, and attachments. Actual resistance varies with the exercise, attachment geometry, and position. The double-ratio benefit applies to the Load Trolley + Pulleys configuration.
The Isolator Cam and lever arm affect the resistance you experience. A 1:2 cable ratio does not mean every exercise feels exactly like the plate weight loaded. Shorter-lever movements such as preacher curls can feel heavier relative to the loaded plates.
A Dedicated Station with Less Plate Loading
Less Loading for Heavy Training
The 1:2 trolley configuration delivers equivalent cable-driven resistance with roughly half the plate weight of the original system in the same exercise setup.
Keep Your Rack Available
Give your Isolator a dedicated home so your squat rack stays available for other training.
Compact Base, Taller Upright
Keep the 28″ × 43″ base while the 72″ upright accommodates additional trolley travel.
Choose Your Resistance Source
Select the trolley-and-pulley system or a VOLTRA Ready stand to suit the equipment you plan to use.
Features
1:2 Trolley Resistance
With Load Trolley + Pulleys, get approximately twice the cable-driven resistance of the original 1:1 system using the same plate weight.
72-Inch Upright
Accommodates the extra travel required by the double-ratio trolley system.
Same Compact Base
28 inches wide × 43 inches long, with no base extender feet or weight-horn extender needed for this version.
Built-In Mobility
Built-in wheels help you reposition your dedicated Isolator station.
Open Bench Access
Use your compatible adjustable bench with the open-side stand design.
Two Resistance Configurations
Choose the plate-loaded trolley system or VOLTRA Ready for your own digital resistance unit. VOLTRA is sold separately.
53-Inch or 72-Inch?
| Feature | Original 53-inch model | New 72-inch model |
|---|---|---|
| Upright height | 53 inches | 72 inches |
| Base dimensions | 28 inches wide × 43 inches long | 28 inches wide × 43 inches long |
| Trolley configuration cable ratio | 1:1 | 1:2 double resistance |
| Plates for equivalent cable-driven resistance | More plate weight | Approximately half the plate weight |
| Trolley travel for equivalent movement | Standard | Approximately twice the travel |
| Base extender feet and weight-horn extender | Included with Load Trolley + Pulleys for additional plate loading; not included with VOLTRA Ready | Not included or needed for the intended configuration |
| Plate-loaded setup best suited to | Mixed strength levels and lighter movements | Heavier training with fewer plates |
Choose the original 1:1 trolley setup if lighter resistance and shared use across strength levels are priorities. Choose the 1:2 trolley setup if you want heavier training with less plate loading. Consider your upper-body exercises as well as your leg training.
Cable-ratio and plate-loading comparisons apply to the Load Trolley + Pulleys options. VOLTRA Ready configurations do not include these trolley systems.
What’s Included
Included with Either Resistance Option
- 72-inch Mini Isolator Stand
- Stand-specific hardware/components
Added with Load Trolley + Pulleys
- 1:2 stand pulley system
- Stand cable
- Plate-loaded Load Trolley
- Standard 12-inch weight horn
VOLTRA Ready Configuration
Does not include the stand pulleys, stand cable, Load Trolley, or weight horn. Beyond Power VOLTRA is not included.
Not Included
- Slide-out base extender feet
- Screw-in weight-horn extender
- Beyond Power VOLTRA
- Weight plates and adjustable bench
- Optional Curl Arm, Pullover Attachment, and other accessories unless explicitly listed above
- Isolator Carriage
- Isolator Cam and Bottom Guide Pulley Bracket
- Lever arms and exercise pads
- Seat/Pad and Kickstand
For VOLTRA setups using a lead cable, a Lead Cable with the correct termination end is required separately.
Specifications
| Specification | 72-inch model |
|---|---|
| Base dimensions | 28″ W × 43″ L |
| Upright height | 72″ |
| Resistance configurations | VOLTRA Ready or Load Trolley + Pulleys |
| Cable ratio — trolley configuration | 1:2 double resistance |
| Trolley travel | Approximately twice the original 1:1 system for equivalent exercise movement |
| Weight horn — trolley configuration | Standard 12″ horn; no horn extender |
| Extension components | No slide-out base extender feet or weight-horn extender |
| Mobility | Built-in wheels |
| Isolator carriage compatibility | Compatible 3″ × 3″ and 75 × 75 mm configurations |
| Isolator Cam and Bottom Guide Pulley Bracket | Required for Cam-based setups; sold separately |
| Seat/Pad and Kickstand | Sold separately |
Dimensions
| Measurement | Size |
|---|---|
| Base width | 28 inches |
| Base length | 43 inches |
| Upright height | 72 inches |
The base dimensions are unchanged from the shorter Mini Isolator Stand. Allow additional room for your bench, attachments, plates, and exercise movement.
Frequently Asked Questions
What is different about the 72-inch model?
It retains the 28-inch-wide × 43-inch-long base and uses a 72-inch upright. The Load Trolley + Pulleys configuration uses a 1:2 double-resistance system with approximately twice the trolley travel of the original 1:1 system.
Does double ratio mean every exercise feels like the weight I load?
No. Representative leg-extension setups may produce felt resistance close to the plate weight loaded, but exercise geometry, attachment position, and moving-component weight change the result. The figures are estimates, not exact resistance values for every movement.
Does the double-resistance claim apply to VOLTRA Ready?
The claim describes the 1:2 Load Trolley + Pulleys system. VOLTRA Ready excludes that system and uses your own VOLTRA as its resistance source.
Is a VOLTRA included?
No. Supply your own Beyond Power VOLTRA. A lead-cable connection also requires a Lead Cable with the correct termination end.
Are extender feet or a weight-horn extender included?
No. They are not needed for this version’s intended configuration. The trolley option includes the standard 12-inch weight horn.
Can I use it for upper-body exercises?
Yes, with the appropriate compatible attachments. Consider the full range of exercises you plan to perform: shorter-lever movements such as preacher curls can feel heavier relative to the plate weight. The original 1:1 trolley model may be a better fit when lighter resistance is a priority.
Do I need a Kickstand?
Use the Kickstand whenever the Seat/Pad is installed or used, and for the intended supported bench-based setup. It is sold separately from the stand.
Can I use my own bench?
Yes, provided its dimensions and positioning suit your intended exercise setup. An adjustable bench is not included.
What do I need for pullovers or bicep curls?
Add the compatible Pullover Attachment for pullovers or Curl Arm for bicep curl setups. These attachments are sold separately.
Can I use the Crossbow Cam or Opposite-Upright Brace?
The Crossbow Cam is not compatible with this Mini Isolator Stand setup. Use the matching standard Isolator Cam. The Opposite-Upright Brace is not compatible and is not required for pullovers.
Is an Isolator included?
No. This stand-only product is for owners of a compatible Isolator. The Cam, Bottom Guide Pulley Bracket, lever arms, pads, Seat/Pad, and Kickstand are sold separately.
Will my existing Isolator work?
Compatible 3×3-inch and 75×75 mm Isolator carriages, including compatible older units, can be used. Confirm the appropriate mounting pins and use a Cam that matches the Internal Shaft in your Isolator.
How do I choose the correct Cam?
Check whether the Cam connection port in your Isolator is round or hexagonal and choose the matching Cam. Contact us with a clear photo of the connection port if you need help identifying it.
Overview
72-inch Mini Isolator Stand
A Dedicated Home for Your Isolator
Give your existing compatible Bulletproof Isolator a dedicated home. This is the stand-only product; the Isolator and Isolator-side accessories are sold separately.
The 72-inch upright accommodates the additional trolley travel of the double-ratio system while retaining a 28-inch-wide × 43-inch-long base. Built-in wheels make repositioning easier, and the open-side design allows access for your compatible adjustable bench.
Choose Your Resistance Setup
VOLTRA Ready
For use with your own Beyond Power VOLTRA. Includes the stand and stand-specific hardware, without the Load Trolley, stand pulleys, stand cable, or weight horn. VOLTRA is not included.
Load Trolley + Pulleys
Includes the stand-side pulley system, cable, plate-loaded Load Trolley, and standard 12-inch weight horn. This configuration uses the 1:2 double-resistance ratio.
Double Resistance with the Trolley Configuration
The 1:2 pulley system provides approximately twice the cable-driven resistance of the original 1:1 system for the same loaded plates. That means roughly half the plate weight for equivalent resistance in the same exercise setup.
The double-resistance claim applies to Load Trolley + Pulleys. The VOLTRA Ready option does not include that pulley system or a VOLTRA.
The 72-inch model does not include or need the slide-out base extender feet or screw-in weight-horn extender used on the shorter model for additional plate loading.
Already own an Isolator? Confirm that you also have the correct Cam, Bottom Guide Pulley Bracket, and the attachments needed for your exercises. Use a Kickstand with the Seat/Pad and intended bench-based setup. These Isolator-side parts are not included with the stand.
Heavier Training. Fewer Plates.
The 1:2 double-ratio pulley system provides approximately twice the cable-driven resistance of the original 1:1 Mini Isolator Stand with the same plates loaded. For equivalent exercise setups, you can reach the same resistance with roughly half the plate weight.
| Plates loaded | Original 1:1: approximate leg-extension resistance | New 1:2: approximate leg-extension resistance |
|---|---|---|
| 50 lb | 25 lb | 50 lb |
| 100 lb | 50 lb | 100 lb |
| 200 lb | 100 lb | 200 lb |
These are simplified estimates for representative leg-extension setups, based on the loaded plates only. They exclude the weight of the trolley, lever arm, and attachments. Actual resistance varies with the exercise, attachment geometry, and position. The double-ratio benefit applies to the Load Trolley + Pulleys configuration.
The Isolator Cam and lever arm affect the resistance you experience. A 1:2 cable ratio does not mean every exercise feels exactly like the plate weight loaded. Shorter-lever movements such as preacher curls can feel heavier relative to the loaded plates.
Why It's Better
A Dedicated Station with Less Plate Loading
Less Loading for Heavy Training
The 1:2 trolley configuration delivers equivalent cable-driven resistance with roughly half the plate weight of the original system in the same exercise setup.
Keep Your Rack Available
Give your Isolator a dedicated home so your squat rack stays available for other training.
Compact Base, Taller Upright
Keep the 28″ × 43″ base while the 72″ upright accommodates additional trolley travel.
Choose Your Resistance Source
Select the trolley-and-pulley system or a VOLTRA Ready stand to suit the equipment you plan to use.
Features
Features
1:2 Trolley Resistance
With Load Trolley + Pulleys, get approximately twice the cable-driven resistance of the original 1:1 system using the same plate weight.
72-Inch Upright
Accommodates the extra travel required by the double-ratio trolley system.
Same Compact Base
28 inches wide × 43 inches long, with no base extender feet or weight-horn extender needed for this version.
Built-In Mobility
Built-in wheels help you reposition your dedicated Isolator station.
Open Bench Access
Use your compatible adjustable bench with the open-side stand design.
Two Resistance Configurations
Choose the plate-loaded trolley system or VOLTRA Ready for your own digital resistance unit. VOLTRA is sold separately.
Comparisons
53-Inch or 72-Inch?
| Feature | Original 53-inch model | New 72-inch model |
|---|---|---|
| Upright height | 53 inches | 72 inches |
| Base dimensions | 28 inches wide × 43 inches long | 28 inches wide × 43 inches long |
| Trolley configuration cable ratio | 1:1 | 1:2 double resistance |
| Plates for equivalent cable-driven resistance | More plate weight | Approximately half the plate weight |
| Trolley travel for equivalent movement | Standard | Approximately twice the travel |
| Base extender feet and weight-horn extender | Included with Load Trolley + Pulleys for additional plate loading; not included with VOLTRA Ready | Not included or needed for the intended configuration |
| Plate-loaded setup best suited to | Mixed strength levels and lighter movements | Heavier training with fewer plates |
Choose the original 1:1 trolley setup if lighter resistance and shared use across strength levels are priorities. Choose the 1:2 trolley setup if you want heavier training with less plate loading. Consider your upper-body exercises as well as your leg training.
Cable-ratio and plate-loading comparisons apply to the Load Trolley + Pulleys options. VOLTRA Ready configurations do not include these trolley systems.
What's Included
What’s Included
Included with Either Resistance Option
- 72-inch Mini Isolator Stand
- Stand-specific hardware/components
Added with Load Trolley + Pulleys
- 1:2 stand pulley system
- Stand cable
- Plate-loaded Load Trolley
- Standard 12-inch weight horn
VOLTRA Ready Configuration
Does not include the stand pulleys, stand cable, Load Trolley, or weight horn. Beyond Power VOLTRA is not included.
Not Included
- Slide-out base extender feet
- Screw-in weight-horn extender
- Beyond Power VOLTRA
- Weight plates and adjustable bench
- Optional Curl Arm, Pullover Attachment, and other accessories unless explicitly listed above
- Isolator Carriage
- Isolator Cam and Bottom Guide Pulley Bracket
- Lever arms and exercise pads
- Seat/Pad and Kickstand
For VOLTRA setups using a lead cable, a Lead Cable with the correct termination end is required separately.
Specifications
Specifications
| Specification | 72-inch model |
|---|---|
| Base dimensions | 28″ W × 43″ L |
| Upright height | 72″ |
| Resistance configurations | VOLTRA Ready or Load Trolley + Pulleys |
| Cable ratio — trolley configuration | 1:2 double resistance |
| Trolley travel | Approximately twice the original 1:1 system for equivalent exercise movement |
| Weight horn — trolley configuration | Standard 12″ horn; no horn extender |
| Extension components | No slide-out base extender feet or weight-horn extender |
| Mobility | Built-in wheels |
| Isolator carriage compatibility | Compatible 3″ × 3″ and 75 × 75 mm configurations |
| Isolator Cam and Bottom Guide Pulley Bracket | Required for Cam-based setups; sold separately |
| Seat/Pad and Kickstand | Sold separately |
Measurements
Dimensions
| Measurement | Size |
|---|---|
| Base width | 28 inches |
| Base length | 43 inches |
| Upright height | 72 inches |
The base dimensions are unchanged from the shorter Mini Isolator Stand. Allow additional room for your bench, attachments, plates, and exercise movement.
Product FAQs
Frequently Asked Questions
What is different about the 72-inch model?
It retains the 28-inch-wide × 43-inch-long base and uses a 72-inch upright. The Load Trolley + Pulleys configuration uses a 1:2 double-resistance system with approximately twice the trolley travel of the original 1:1 system.
Does double ratio mean every exercise feels like the weight I load?
No. Representative leg-extension setups may produce felt resistance close to the plate weight loaded, but exercise geometry, attachment position, and moving-component weight change the result. The figures are estimates, not exact resistance values for every movement.
Does the double-resistance claim apply to VOLTRA Ready?
The claim describes the 1:2 Load Trolley + Pulleys system. VOLTRA Ready excludes that system and uses your own VOLTRA as its resistance source.
Is a VOLTRA included?
No. Supply your own Beyond Power VOLTRA. A lead-cable connection also requires a Lead Cable with the correct termination end.
Are extender feet or a weight-horn extender included?
No. They are not needed for this version’s intended configuration. The trolley option includes the standard 12-inch weight horn.
Can I use it for upper-body exercises?
Yes, with the appropriate compatible attachments. Consider the full range of exercises you plan to perform: shorter-lever movements such as preacher curls can feel heavier relative to the plate weight. The original 1:1 trolley model may be a better fit when lighter resistance is a priority.
Do I need a Kickstand?
Use the Kickstand whenever the Seat/Pad is installed or used, and for the intended supported bench-based setup. It is sold separately from the stand.
Can I use my own bench?
Yes, provided its dimensions and positioning suit your intended exercise setup. An adjustable bench is not included.
What do I need for pullovers or bicep curls?
Add the compatible Pullover Attachment for pullovers or Curl Arm for bicep curl setups. These attachments are sold separately.
Can I use the Crossbow Cam or Opposite-Upright Brace?
The Crossbow Cam is not compatible with this Mini Isolator Stand setup. Use the matching standard Isolator Cam. The Opposite-Upright Brace is not compatible and is not required for pullovers.
Is an Isolator included?
No. This stand-only product is for owners of a compatible Isolator. The Cam, Bottom Guide Pulley Bracket, lever arms, pads, Seat/Pad, and Kickstand are sold separately.
Will my existing Isolator work?
Compatible 3×3-inch and 75×75 mm Isolator carriages, including compatible older units, can be used. Confirm the appropriate mounting pins and use a Cam that matches the Internal Shaft in your Isolator.
How do I choose the correct Cam?
Check whether the Cam connection port in your Isolator is round or hexagonal and choose the matching Cam. Contact us with a clear photo of the connection port if you need help identifying it.
EXERCISES YOU CAN PERFORM
PULLOVERS ON MINI ISOLATOR STAND
PREACHER CURLS ON MINI ISOLATOR STAND
TRICEP PUSHDOWNS ON MINI ISOLATOR STAND
PRONE LEG CURLS ON MINI ISOLATOR STAND
REVERSE HYPER EXTENSIONS ON MINI ISOLATOR STAND
PRONE LEG CURLS WITH BACK PAD ON MINI ISOLATOR STAND
Back Pad COMING SOON!
LAYING LEG EXTENSIONS ON MINI ISOLATOR STAND
Back Pad COMING SOON!
SEATED LEG CURLS ON MINI ISOLATOR STAND
Back Pad COMING SOON!
MINI ISOLATOR STAND (72" TALL VERSION) Works With
